Samsung Ml 1640 Toner Level Reset with Firmware V1.01.00.78: A Step-by-Step Tutorial

How to Reset the Toner Level of Your Samsung Ml 1640 Printer with Firmware V1.01.00.78

If you have a Samsung Ml 1640 printer with firmware V1.01.00.78, you may encounter a problem when the printer shows a low toner warning or stops printing altogether. This is because the printer has a microchip that counts the number of pages printed and limits the use of the toner cartridge after a certain amount.

Samsung Ml 1640 V1.01.00.78 Toner Reset

Download Zip: https://www.google.com/url?q=https%3A%2F%2Ftinurli.com%2F2tXjI8&sa=D&sntz=1&usg=AOvVaw3k0Kfy2hM3ZJFmskogzPAo

In this article, we will explain what a toner cartridge is and why it needs to be reset, how to refill your Samsung Ml 1640 toner cartridge, and how to reset your toner cartridge with firmware V1.01.00.78 using three different methods.

What is a Toner Cartridge and Why Does It Need to Be Reset?

The Function and Components of a Toner Cartridge

A toner cartridge is a consumable component of a laser printer that contains toner powder, which is a fine mixture of plastic particles, carbon, and coloring agents that create the images and text on paper.

A toner cartridge consists of several parts, such as:

• A hopper that stores the toner powder

• A roller that feeds the toner powder to the drum

• A drum that transfers the toner powder to the paper using an electrostatic charge

• A blade that scrapes off any excess toner powder from the drum

• A waste bin that collects the used toner powder

• A chip that communicates with the printer and monitors the toner level

The Reasons for Resetting a Toner Cartridge

There are two main reasons why you may need to reset your toner cartridge:

• To save money by refilling your toner cartridge instead of buying a new one.

• To avoid wasting toner powder by using it until it runs out completely.

When you buy a new toner cartridge for your Samsung Ml 1640 printer, it comes with a chip that has a preset page count limit, which varies depending on the type and capacity of the cartridge. For example, a standard black toner cartridge (MLT-D108S) has a limit of 1500 pages, while a high yield black toner cartridge (MLT-D108L) has a limit of 2500 pages.

Once you reach the page count limit, the chip sends a signal to the printer that the toner level is low or exhausted, and the printer displays a warning message or stops printing altogether.

However, this does not mean that your toner cartridge is actually empty or unusable. In fact, there may be still some toner powder left in the hopper that can print more pages.

Therefore, by resetting your toner cartridge, you can override the chip's page count limit and continue using your toner cartridge until it runs out of toner powder completely.

This way, you can save money by refilling your toner cartridge instead of buying a new one, and avoid wasting toner powder by using it until it runs out completely.

How to Refill Your Samsung Ml 1640 Toner Cartridge

The Tools and Materials You Need

To refill your Samsung Ml 1640 toner cartridge, you will need:

• A compatible toner refill kit that contains black toner powder, a funnel cap, and instructions

• A screwdriver

• A pair of gloves

• A paper towel or cloth

• A plastic bag or container

The Steps to Refill Your Toner Cartridge

To refill your Samsung Ml 1640 toner cartridge, follow these steps:

• Turn off your printer and unplug it from the power source.

• Open the front cover of your printer and pull out the toner cartridge.

• Put on your gloves and place the toner cartridge on a paper towel or cloth.

• Locate the fill hole on the side of the toner cartridge and use a screwdriver to remove the plug or cover.

• Shake the bottle of black toner powder gently and remove the cap.

• Attach the funnel cap to the bottle and insert it into the fill hole.

• Squeeze the bottle gently and slowly fill up the hopper with black toner powder until it is full or reaches the fill line.

• Remove the funnel cap from the fill hole and replace the plug or cover with a screwdriver.

• Clean any excess toner powder from the outside of the toner cartridge with a paper towel or cloth.

• Place the used bottle and funnel cap in a plastic bag or container for disposal or recycling.

• Insert the refilled toner cartridge back into your printer and close the front cover.

• Plug in your printer and turn it on.

How to Reset Your Samsung Ml 1640 Toner Cartridge with Firmware V1.01.00.78

The Difference Between a Starter and a Standard Toner Cartridge

If you have bought your Samsung Ml 1640 printer new, it comes with a starter toner cartridge (MLT-D108S) that has no chip on it. This means that there is no page count limit for this cartridge, but also no way to monitor its actual toner level.

If you have bought a replacement standard or high yield toner cartridge (MLT-D108S or MLT-D108L) for your printer, it comes with a chip on it that has a preset page count limit as mentioned above.

The difference between these two types of cartridges affects how you can reset them with firmware V1.01.00.78.

The Methods to Reset Your Toner Cartridge

Method 1: Using a Chip Resetter Device

If you have a standard or high yield toner cartridge (MLT-D108S or MLT-D108L) with firmware V1.01.00.78, you can use a chip resetter device to reset its page count limit.

A chip resetter device is an electronic tool that connects to your computer via USB cable and communicates with your printer via infrared signal. It can read and write data on your chip's memory and reset its page count limit to zero.

To use this method, follow these steps:

• Buy or borrow a compatible chip resetter device for your Samsung Ml 1640 printer model.

• Turn off your printer and unplug it from the power source.

• Open the front cover of your printer and pull out the toner cartridge.

• Locate the chip on the side of the toner cartridge and align it with the chip resetter device's connector.

• Connect the chip resetter device to your computer via USB cable and run the software that comes with it.

• Select your printer model and toner cartridge type from the software's menu and click on the reset button.

• Wait for a few seconds until you see a confirmation message on the software's screen that the chip has been reset successfully.

• Disconnect the chip resetter device from your computer and remove it from the toner cartridge.

• Insert the reset toner cartridge back into your printer and close the front cover.

• Plug in your printer and turn it on.

Method 2: Shorting Two Pins on the Chip

If you have a starter toner cartridge (MLT-D108S) with firmware V1.01.00.78, you can use a simple trick to reset its page count limit by shorting two pins on the chip while powering it on.

This method works by creating a temporary short circuit on the chip's memory that erases its page count data and resets it to zero.

To use this method, follow these steps:

• Turn off your printer and unplug it from the power source.

• Open the front cover of your printer and pull out the toner cartridge.

• Locate the chip on the side of the toner cartridge and identify its pins. The pins are numbered from 1 to 8, starting from left to right when looking at the chip from above.

• Use a small piece of wire or metal clip to connect pin 1 and pin 4 together. Make sure that they are touching firmly and securely.

• Plug in your printer and turn it on while holding the wire or clip in place.

• Wait for about 10 seconds until you hear a beep sound from your printer or see a green light on its display panel that indicates that it has recognized the toner cartridge.

• Turn off your printer and unplug it from the power source again.

• Remove the wire or clip from pin 1 and pin 4 carefully without touching any other pins or parts of the chip.

• Insert the reset toner cartridge back into your printer and close the front cover.

• Plug in your printer and turn it on again.

Method 3: Updating the Printer Firmware

If you have either a starter or a standard toner cartridge (MLT-D108S or MLT-D108L) with firmware V1.01.00.78, you can also update your printer firmware to a newer version that does not have the page count limit for the toner cartridge.

This method works by installing a new software on your printer that overrides the old firmware and allows you to use any toner cartridge without any restriction.

To use this method, follow these steps:

• Download the latest firmware update for your Samsung Ml 1640 printer from the official website or a trusted source.

• Extract the downloaded file to a folder on your computer and run the executable file.

• Follow the instructions on the screen to connect your printer to your computer via USB cable and start the firmware update process.

• Wait for a few minutes until you see a confirmation message on the screen that the firmware update has been completed successfully.

• Disconnect your printer from your computer and restart it.

• Insert any toner cartridge into your printer and enjoy printing without any limit.

Conclusion

In this article, we have shown you how to reset the toner level of your Samsung Ml 1640 printer with firmware V1.01.00.78 using three different methods: using a chip resetter device, shorting two pins on the chip, or updating the printer firmware.

By resetting your toner cartridge, you can save money by refilling your toner cartridge instead of buying a new one, and avoid wasting toner powder by using it until it runs out completely.

We hope that this article has been helpful and informative for you. If you have any questions or comments, please feel free to leave them below.

Happy printing!

FAQs

Q1: How do I know if my Samsung Ml 1640 printer has firmware V1.01.00.78?

A1: You can check your printer's firmware version by printing a configuration report. To do this, press and hold the cancel button on your printer for about 10 seconds until you see a green light on its display panel. Then release the button and wait for the report to print out. On the report, look for the firmware version under "System Information". If it says V1.01.00.78, then you have this firmware version on your printer.

Q2: How often do I need to reset my toner cartridge?

A2: You need to reset your toner cartridge whenever you reach the page count limit set by the chip or whenever you refill your toner cartridge with new toner powder. This will allow you to use your toner cartridge until it runs out of toner powder completely.

Q3: What are the benefits of resetting my toner cartridge?

A3: The benefits of resetting your toner cartridge are:

• You can save money by refilling your toner cartridge instead of buying a new one.

• You can avoid wasting toner powder by using it until it runs out completely.

• You can print more pages with the same toner cartridge.

• You can reduce environmental impact by reusing your toner cartridge instead of throwing it away.

Q4: What are the risks of resetting my toner cartridge?

A4: The risks of resetting your toner cartridge are:

• You may void your printer's warranty if you use a non-original or refilled toner cartridge.

• You may damage your printer or toner cartridge if you use an incompatible or faulty chip resetter device or firmware update.

• You may experience poor print quality or performance if you use low-quality or incorrect toner powder or if you overfill or underfill your toner cartridge.

• You may expose yourself to health hazards if you inhale or touch the toner powder without proper protection or if you dispose of it improperly.

Q5: Where can I buy a chip resetter device or a new toner cartridge?

A5: You can buy a chip resetter device or a new toner cartridge from various online or offline sources, such as:

• The official website of Samsung or HP

• Online marketplaces like Amazon or eBay

• Local computer or printer shops

• Toner refill kits suppliers